Ethernet Surge Arrestor Kit

$225.00 USD

  • Power-Over-Ethernet (PoE) compatible
  • Cable shield isolated from safety ground
  • CAT6, CAT5e and CAT5 compatibility
  • GR-1089 Intra-Building rated
  • Industrial grade weatherproof die cast aluminum enclosure with mounting brackets

The FW-ETHLP provides superior lightning and surge protection for indoor 10/100/1000 Base-T Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. This design provides protection for both common and differential mode surges. It isolates the cable shield from the safety ground, minimizing the chances of a ground loop being introduced.

SKU: FW-ETHLP Categories: ,

Description

This suppressor features an industrial grade die cast aluminum enclosure with gasketed cover and concealed mounting holes. It includes an aluminum mounting kit and hardware. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-boot RJ45 connector through so pre-terminated cables can be used.

Tech Specs - Electrical

PoE Mode Support Mode A and B
CAT6 Data Lines Pair 1: Pins 1 and 2 / Pair 2: Pins 3 and 6 / Pair 3: Pins 4 and 5 / Pair 4: Pins 7 and 8
Clamping Voltage Wire - Wire: 15 V / Wire - Ground: 90 V / Shield - Ground: 90 V
Ethernet Connectors 2 x Shielded RJ45 Jacks

Tech Specs - Mechanical

RoHS Compliant Yes
Ground Lug 10 AWG Max.
Enclosure Material Die Cast Aluminum
Dimensions (L x W x D) 4.91” x 3.14” x 2.3” (124.8 mm x 79.7 mm x 58.4 mm)
Operational Temperature -40 °F to 176 °F (-40 °C to 80 °C)
Weight 1.15 lbs (0.52 kg)

Technical Specifications

Electrical

Tech Specs - Electrical

PoE Mode Support Mode A and B
CAT6 Data Lines Pair 1: Pins 1 and 2 / Pair 2: Pins 3 and 6 / Pair 3: Pins 4 and 5 / Pair 4: Pins 7 and 8
Clamping Voltage Wire - Wire: 15 V / Wire - Ground: 90 V / Shield - Ground: 90 V
Ethernet Connectors 2 x Shielded RJ45 Jacks

Mechanical

Tech Specs - Mechanical

RoHS Compliant Yes
Ground Lug 10 AWG Max.
Enclosure Material Die Cast Aluminum
Dimensions (L x W x D) 4.91” x 3.14” x 2.3” (124.8 mm x 79.7 mm x 58.4 mm)
Operational Temperature -40 °F to 176 °F (-40 °C to 80 °C)
Weight 1.15 lbs (0.52 kg)