Cat. 12 Band 42,43, 48 Indoor CPE (Cat. A)

$200.00 USD

  • Supports TDD-LTE Band 42/43 & 48*
  • CBRS Cat. A Certified
  • 3GPP Release 12 Compliant
  • Supports up to UE LTE Downlink Category 12 / Uplink Category 13 PHY Rate**
  • Supports 4×4 MIMO with 40 MHz CA Max.
  • Supports DL 256QAM with DL 2×2 MIMO only up to 4 Carrier Aggregation
  • Physical 2Tx & 8Rx in RF Front End
  • Supports IEEE 802.3, IEEE 802.3u, 802.3ab (10/100/1000 Mbps)
  • Supports 802.11b/g/n (2 x 2) Wi-Fi Technology
  • Supports 802.11ac Wave 2 (2 x 2) Wi-Fi Technology

*FCC Certified for only Band 48

** TDD Cat 12 with 4×4 + 40 MHz carrier aggregation peak downlink throughput is around 440 Mbps @ TDD Config 2 SSF 7 with 64QAM; uplink throughput is around 30 Mbps @ 20+20 MHz TDD Config 2 SSF 7 with 64QAM.

SKU: FWC-145IN-35 Categories: ,

Description

BLiNQ’s FWC-145IN-35 Indoor CPE is a Category 12/13 Single Mode CPE that supports BLiNQ’s 4G LTE solutions. Complying with the IEEE 802.11 wireless standard, this indoor CPE features gigabit Ethernet ports for fast and efficient connections.

With an easy, simple installation and a fully automated deployment, this CPE is the perfect solution for any indoor setting.

Warranty Plans

*Premium warranty is additive to the Basic Warranty for the first year, complementing it with enhanced Software and Support services.

Tech Specs - Radio Specification

Carrier Aggregation DL - 4CC up to 20 MHz each (w. DL 2 x2) / DL - 2CC up to 20 MHz each (w. DL 4 x4) / DL - 1CC up to 20 MHz each (w. DL 4 x8) / UL - Maximum 40 MHz with 2CC
UL Modulation Max. 64 QAM
DL Modulation 4x4 MIMO with 64QAM Max. / 2x2 MIMO with 256QAM Max.
Receiver Sensitivity (@ 20 MHz) -96 dBm
Tx Power Dynamic Range 63 dBm
UL 2Tx 23 dBm
UL Carrier Aggregation Bandwidth 40 MHz max. with 2CC
DL Carrier Aggregation Bandwidth 80 MHz max.
Frequency Band TDD LTE Band 42, 43, 48*
Peak UL Throughput 30 Mbps (TDD Config 2-7 with 64 QAM)
Peak DL Throughput 440 Mbps (TDD Config 2-7)
LTE Compliance 3GPP Release 12
MIMO DL 2x2 / 4x4 / 8x4 / UL 1x2 (with diversity); UL 2x2
Channel Bandwidth 10, 20 MHz

Tech Specs - Networking & OAM

Ethernet LAN Port 2 x RJ45 Port; 10/100/1000 Auto-Sensing, Auto-MDX
SIM Function 1.8V, 3V SIM and USIM card
NAT/Dynamic NAT Yes
Networking Modes Router, Bridge and Tunnel (GRE and L2TP)
DCHP Server in LAN Yes (253 clients max.)
VPN Pass-Through – IPSec/PPTP/L2TP Yes
HTTP(s) Server Yes
Networking Debug/Testing IPerf, Ping, Traceroute

Tech Specs - Mechanical, Environmental & Regulatory

Dimension (L x W x H) 7.9” x 5.3” (200 mm x 134 mm)
Weight 1.1 lbs (0.5 kg)
Power Input: Universal range 100~240V AC / Output: 12 V/1.5A DC
Operational Temperature 32°F to 104°F (0°C to 40°C)
Storage Temperature -4°F to 140°F (-20°C to 60°C)
Radio (CBRS) FCC Part 96 (Cat. A)
Radio (Wi-Fi 2.4 GHz) FCC Part 15C
Radio (Wi-Fi 5 GHz) FCC Part 15E

Tech Specs - Device Management & Security

OAM WebUI, SNMP, TR-069 and TR-0143
FOTA Upgrade Yes
System Log/Diagnostic Yes (Chipset embedded tool)
L2/L3 Firewall Basic Firewall/Port Forwarding/Port Trigger/DMZ/Remote WAN Ping/Remote Web Access Control
Time Zone Configuration Yes
Dual Firmware Dual Image (Switchable)

Technical Specifications

Radio Specification

Tech Specs - Radio Specification

Carrier Aggregation DL - 4CC up to 20 MHz each (w. DL 2 x2) / DL - 2CC up to 20 MHz each (w. DL 4 x4) / DL - 1CC up to 20 MHz each (w. DL 4 x8) / UL - Maximum 40 MHz with 2CC
UL Modulation Max. 64 QAM
DL Modulation 4x4 MIMO with 64QAM Max. / 2x2 MIMO with 256QAM Max.
Receiver Sensitivity (@ 20 MHz) -96 dBm
Tx Power Dynamic Range 63 dBm
UL 2Tx 23 dBm
UL Carrier Aggregation Bandwidth 40 MHz max. with 2CC
DL Carrier Aggregation Bandwidth 80 MHz max.
Frequency Band TDD LTE Band 42, 43, 48*
Peak UL Throughput 30 Mbps (TDD Config 2-7 with 64 QAM)
Peak DL Throughput 440 Mbps (TDD Config 2-7)
LTE Compliance 3GPP Release 12
MIMO DL 2x2 / 4x4 / 8x4 / UL 1x2 (with diversity); UL 2x2
Channel Bandwidth 10, 20 MHz

Networking & OAM

Tech Specs - Networking & OAM

Ethernet LAN Port 2 x RJ45 Port; 10/100/1000 Auto-Sensing, Auto-MDX
SIM Function 1.8V, 3V SIM and USIM card
NAT/Dynamic NAT Yes
Networking Modes Router, Bridge and Tunnel (GRE and L2TP)
DCHP Server in LAN Yes (253 clients max.)
VPN Pass-Through – IPSec/PPTP/L2TP Yes
HTTP(s) Server Yes
Networking Debug/Testing IPerf, Ping, Traceroute

Mechanical, Environmental & Regulatory

Tech Specs - Mechanical, Environmental & Regulatory

Dimension (L x W x H) 7.9” x 5.3” (200 mm x 134 mm)
Weight 1.1 lbs (0.5 kg)
Power Input: Universal range 100~240V AC / Output: 12 V/1.5A DC
Operational Temperature 32°F to 104°F (0°C to 40°C)
Storage Temperature -4°F to 140°F (-20°C to 60°C)
Radio (CBRS) FCC Part 96 (Cat. A)
Radio (Wi-Fi 2.4 GHz) FCC Part 15C
Radio (Wi-Fi 5 GHz) FCC Part 15E

Device Management & Security

Tech Specs - Device Management & Security

OAM WebUI, SNMP, TR-069 and TR-0143
FOTA Upgrade Yes
System Log/Diagnostic Yes (Chipset embedded tool)
L2/L3 Firewall Basic Firewall/Port Forwarding/Port Trigger/DMZ/Remote WAN Ping/Remote Web Access Control
Time Zone Configuration Yes
Dual Firmware Dual Image (Switchable)

* FCC Certified for only Band 48

Related products