Description
This three foot (0.8m) tall, single band, six port multibeam array contains three independent LTE Optimized Breams covering 1695-2690 MHz frequencies.
LTE Optimized Beams improve LTE data throughput by minimizing beam crossover, providing an efficient use of valuable radio capacity and frequency spectrum.
The single panel design of the CCI Three-Beam Special Event Antenna offers the opportunity to reduce antenna count and directly replaces multiple narrow beam antennas. The antenna minimizes the need for optimization as each beam is spaced optimally for maximum throughput thus providing significant CAPEX (Capital Expenditure) and OPEX (Operational Expenditure) cost savings.
Technical Specifications
Electrical
Tech Specs - Electrical
| Ports |
6 x High Band Ports |
| Frequency Range |
2496-2690 MHz* |
| Gain |
21.5 dBi |
| Azimuth Beamwidth (-3dB) |
12.8º |
| Elevation Beamwidth (-3dB) |
9.7º |
| Electrical Downtilt |
6º |
| Front-to-Back Ratio @180º |
> 35 dB |
| Cross-Polar Port-to-Port Isolation |
> 24 dB |
| Interbeam Co-Pol Isolation (Adjacent Beams) |
> 15 dB |
| Voltage Standing Wave Ratio (VSWR) |
< 1.5:1 |
| Polarization |
Dual Pol 45º |
| Input Impedance |
50 ohms |
| Lightning Protection |
DC Ground |
Mechanical
Tech Specs - Mechanical
| Dimensions (L x W x D) |
30.5” x 24.9” x 6.6” (776 mm x 633 mm x 167 mm) |
| Survival Wind Speed |
Up to 150 mph (240 km/hr) |
| Weight |
41.6 lbs (18.9 kg)** |
| Front Wind Load |
162 lbs (722 N) @ 100 mph (161 kph) |
| Side Wind Load |
46 lbs (206 N) @ 100 mph (161 kph) |
| Connector |
6 x 7-16 DIN female long neck or 4.3-10 female |
| Mounting Pole |
2” to 5” (5 cm to 12 cm) |
*The specifications on this table only applies for the 2496-2690 MHz range. For more details on this antenna, please contact BLiNQ Sales.
**Weight excludes mounting
