$1,250.00 USD
Kit includes:
This DC Power kit is suitable for installations where the DC power source is between 150 ft to 300 ft. from where the eNB is installed. The surge suppressor included is suitable for suppression of surge induced by lightning strikes. It should be installed near to the eNB for optimal protection of the unit.
| Max. Continuous Operating Voltage | 75V |
|---|---|
| Rated Current | 16A |
| Rated Discharge Current | 20kA |
| Nominal DC Voltage | 48V |
| Max. Discharge Current | 40kA |
| IP Rating | IP55 |
| Cable Connector (Power Supply) | Suitable for wire of 1-10mm² |
| Cable Connector (Grounding) | Suitable for wire of 16mm² |
| Connector Torque | 1.36Nm |
| Stripped Length | 10mm |
| Response Time | -48 V to RTN: 25ns; RTN to PE: 100ns |
| Mounting | Pole Mounting or Wall Mounting |
| Conductor Type, Singles | Stranded |
|---|---|
| Conductors, Quantity | 2 |
| Conductor Material | Tinned Copper |
| Filler Material | Polypropylene |
| Ground Wire Type | Stranded |
| Diameter Over Conductor, singles, specific | 0.1570" per 168 strands |
| Jacket Thickness | 0.045" (1.143 mm) |
| Jacket Material | PVC |
| Conductor Gauge, Singles | 8 AWG |
| Ground Wire Gauge | 10 AWG |
| Conductor DC Resistance | 0.67 ohms/kft (2.21 ohms/km) |
| Conductor DC Resistance Note | Maximum value based on a standard condition of 68 °F (20 °C) |
| Safety Voltage Rating | 600V |
| Operating Temperature | -40 °F to +194 °F (-40 °C to +90 °C) |
| Max. Continuous Operating Voltage | 75V |
|---|---|
| Rated Current | 16A |
| Rated Discharge Current | 20kA |
| Nominal DC Voltage | 48V |
| Max. Discharge Current | 40kA |
| IP Rating | IP55 |
| Cable Connector (Power Supply) | Suitable for wire of 1-10mm² |
| Cable Connector (Grounding) | Suitable for wire of 16mm² |
| Connector Torque | 1.36Nm |
| Stripped Length | 10mm |
| Response Time | -48 V to RTN: 25ns; RTN to PE: 100ns |
| Mounting | Pole Mounting or Wall Mounting |
| Conductor Type, Singles | Stranded |
|---|---|
| Conductors, Quantity | 2 |
| Conductor Material | Tinned Copper |
| Filler Material | Polypropylene |
| Ground Wire Type | Stranded |
| Diameter Over Conductor, singles, specific | 0.1570" per 168 strands |
| Jacket Thickness | 0.045" (1.143 mm) |
| Jacket Material | PVC |
| Conductor Gauge, Singles | 8 AWG |
| Ground Wire Gauge | 10 AWG |
| Conductor DC Resistance | 0.67 ohms/kft (2.21 ohms/km) |
| Conductor DC Resistance Note | Maximum value based on a standard condition of 68 °F (20 °C) |
| Safety Voltage Rating | 600V |
| Operating Temperature | -40 °F to +194 °F (-40 °C to +90 °C) |
Reliable nationwide shipping
Online payment
Knowledgeable | Responsive | Authentic
