$1,600.00 USD
This kit includes:
All orders are considered final and non-refundable.
This kit includes items that are needed for an installation on a tall tower or where the power and gateway/router connectivity are a distance away from the eNB.
The surge suppressor should be installed near to the eNB and grounded with a 6 AWG cable. It has a die-casting aluminum box that can withstand high temperature and is corrosion resistant.
| Max. Continuous Operating Voltage | 75V |
|---|---|
| Rated Current | 16A |
| Rated Discharge Current | 20kA |
| Nominal DC Voltage | 48V |
| Max. Discharge Current | 40kA |
| IP Rating | IP55 |
| Cable Connector (Power Supply) | Suitable for wire of 1-10mm² |
| Cable Connector (Grounding) | Suitable for wire of 16mm² |
| Connector Torque | 1.36Nm |
| Stripped Length | 10mm |
| Response Time | -48 V to RTN: 25ns; RTN to PE: 100ns |
| Mounting | Pole Mounting or Wall Mounting |
| Conductor Type, Singles | Stranded |
|---|---|
| Conductors, Quantity | 2 |
| Conductor Material | Tinned copper |
| Filler Material | Polypropylene |
| Ground Wire Type | Stranded |
| Diameter Over Conductor, singles, specific | 0.1260" per 105 strands |
| Jacket Thickness | 0.045" (1.143 mm) |
| Jacket Material | PVC |
| Conductor Gauge, Singles | 10 AWG |
| Ground Wire Gauge | 10 AWG |
| Conductor DC Resistance | 1.06 ohms/kft (3.478 ohms/km) |
| Conductor DC Resistance Note | Maximum value based on a standard condition of 68 °F (20 °C) |
| Safety Voltage Rating | 600V |
| Operating Temperature | -40 °F to +194 °F (-40 °C to +90 °C) |
| Ethernet Connectors | 2 x Shielded RJ45 Jacks |
|---|---|
| Clamping Voltage | Wire-Wire: 15 Volts / Wire-Ground: 90 Volts / Shield-Ground: 90 Volts |
| PoE Mode Support | Mode A and B |
| Enclosure Material | Die Cast Aluminum |
| Ground Lug | 10 AWG Max. |
| Operating Temperature | -40 °F to 176 °F (-40 °C to 80 °C) |
| Weight | 1.15 lbs (0.52 kg) |
| Dimensions (W x H x L) | 4.91" x 3.14" x 2.3" (124.8 x 79.7 x 58.4 mm) |
| Cable Gauge | 23 AWG |
|---|---|
| Bandwidth | Tested to 550 Mhz |
| Conductors | 0.57mm (Nominal O.D.) |
| Conductor material | Bare Copper |
| Max. Continuous Operating Voltage | 75V |
|---|---|
| Rated Current | 16A |
| Rated Discharge Current | 20kA |
| Nominal DC Voltage | 48V |
| Max. Discharge Current | 40kA |
| IP Rating | IP55 |
| Cable Connector (Power Supply) | Suitable for wire of 1-10mm² |
| Cable Connector (Grounding) | Suitable for wire of 16mm² |
| Connector Torque | 1.36Nm |
| Stripped Length | 10mm |
| Response Time | -48 V to RTN: 25ns; RTN to PE: 100ns |
| Mounting | Pole Mounting or Wall Mounting |
| Conductor Type, Singles | Stranded |
|---|---|
| Conductors, Quantity | 2 |
| Conductor Material | Tinned copper |
| Filler Material | Polypropylene |
| Ground Wire Type | Stranded |
| Diameter Over Conductor, singles, specific | 0.1260" per 105 strands |
| Jacket Thickness | 0.045" (1.143 mm) |
| Jacket Material | PVC |
| Conductor Gauge, Singles | 10 AWG |
| Ground Wire Gauge | 10 AWG |
| Conductor DC Resistance | 1.06 ohms/kft (3.478 ohms/km) |
| Conductor DC Resistance Note | Maximum value based on a standard condition of 68 °F (20 °C) |
| Safety Voltage Rating | 600V |
| Operating Temperature | -40 °F to +194 °F (-40 °C to +90 °C) |
| Ethernet Connectors | 2 x Shielded RJ45 Jacks |
|---|---|
| Clamping Voltage | Wire-Wire: 15 Volts / Wire-Ground: 90 Volts / Shield-Ground: 90 Volts |
| PoE Mode Support | Mode A and B |
| Enclosure Material | Die Cast Aluminum |
| Ground Lug | 10 AWG Max. |
| Operating Temperature | -40 °F to 176 °F (-40 °C to 80 °C) |
| Weight | 1.15 lbs (0.52 kg) |
| Dimensions (W x H x L) | 4.91" x 3.14" x 2.3" (124.8 x 79.7 x 58.4 mm) |
| Cable Gauge | 23 AWG |
|---|---|
| Bandwidth | Tested to 550 Mhz |
| Conductors | 0.57mm (Nominal O.D.) |
| Conductor material | Bare Copper |
Reliable nationwide shipping
Online payment
Knowledgeable | Responsive | Authentic
