$1,825.00 USD
Installation kit for up to 300 ft. tower where DC power source is available. Includes:
All orders are considered final and non-refundable.
This installation kit is ideal a tower installation for up to 300 ft. where DC power source is available. It includes two DC surge suppressors (to be grounded with 6 AWG cable) that can be installed at both top and bottom of the tower, along with an ethernet surge protector at the bottom of tower.
Professional installation is recommended with this kit.
| Max. Continuous Operating Voltage | 75V |
|---|---|
| Rated Current | 16A |
| Rated Discharge Current | 20kA |
| Nominal DC Voltage | 48V |
| Max. Discharge Current | 40kA |
| IP Rating | IP55 |
| Cable Connector (Power Supply) | Suitable for wire of 1-10mm² |
| Cable Connector (Grounding) | Suitable for wire of 16mm² |
| Connector Torque | 1.36Nm |
| Stripped Length | 10mm |
| Response Time | -48 V to RTN: 25ns; RTN to PE: 100ns |
| Mounting | Pole Mounting or Wall Mounting |
| Conductor Type, Singles | Stranded |
|---|---|
| Conductors, Quantity | 2 |
| Conductor Material | Tinned copper |
| Filler Material | Polypropylene |
| Ground Wire Type | Stranded |
| Diameter Over Conductor, singles, specific | 0.1260" per 105 strands |
| Jacket Thickness | 0.045" (1.143 mm) |
| Jacket Material | PVC |
| Conductor Gauge, Singles | 10 AWG |
| Ground Wire Gauge | 10 AWG |
| Conductor DC Resistance | 1.06 ohms/kft (3.478 ohms/km) |
| Conductor DC Resistance Note | Maximum value based on a standard condition of 68 °F (20 °C) |
| Safety Voltage Rating | 600V |
| Operating Temperature | -40 °F to +194 °F (-40 °C to +90 °C) |
| Ethernet Connectors | 2 x Shielded RJ45 Jacks |
|---|---|
| Clamping Voltage | Wire-Wire: 15 Volts / Wire-Ground: 90 Volts / Shield-Ground: 90 Volts |
| PoE Mode Support | Mode A and B |
| Enclosure Material | Die Cast Aluminum |
| Ground Lug | 10 AWG Max. |
| Operating Temperature | -40 °F to 176 °F (-40 °C to 80 °C) |
| Weight | 1.15 lbs (0.52 kg) |
| Dimensions (W x H x L) | 4.91" x 3.14" x 2.3" (124.8 x 79.7 x 58.4 mm) |
| Cable Gauge | 23 AWG |
|---|---|
| Bandwidth | Tested to 550MHz |
| Conductors | 0.57mm (Nominal O.D) |
| Conductor material | Bare Copper |
| Max. Continuous Operating Voltage | 75V |
|---|---|
| Rated Current | 16A |
| Rated Discharge Current | 20kA |
| Nominal DC Voltage | 48V |
| Max. Discharge Current | 40kA |
| IP Rating | IP55 |
| Cable Connector (Power Supply) | Suitable for wire of 1-10mm² |
| Cable Connector (Grounding) | Suitable for wire of 16mm² |
| Connector Torque | 1.36Nm |
| Stripped Length | 10mm |
| Response Time | -48 V to RTN: 25ns; RTN to PE: 100ns |
| Mounting | Pole Mounting or Wall Mounting |
| Conductor Type, Singles | Stranded |
|---|---|
| Conductors, Quantity | 2 |
| Conductor Material | Tinned copper |
| Filler Material | Polypropylene |
| Ground Wire Type | Stranded |
| Diameter Over Conductor, singles, specific | 0.1260" per 105 strands |
| Jacket Thickness | 0.045" (1.143 mm) |
| Jacket Material | PVC |
| Conductor Gauge, Singles | 10 AWG |
| Ground Wire Gauge | 10 AWG |
| Conductor DC Resistance | 1.06 ohms/kft (3.478 ohms/km) |
| Conductor DC Resistance Note | Maximum value based on a standard condition of 68 °F (20 °C) |
| Safety Voltage Rating | 600V |
| Operating Temperature | -40 °F to +194 °F (-40 °C to +90 °C) |
| Ethernet Connectors | 2 x Shielded RJ45 Jacks |
|---|---|
| Clamping Voltage | Wire-Wire: 15 Volts / Wire-Ground: 90 Volts / Shield-Ground: 90 Volts |
| PoE Mode Support | Mode A and B |
| Enclosure Material | Die Cast Aluminum |
| Ground Lug | 10 AWG Max. |
| Operating Temperature | -40 °F to 176 °F (-40 °C to 80 °C) |
| Weight | 1.15 lbs (0.52 kg) |
| Dimensions (W x H x L) | 4.91" x 3.14" x 2.3" (124.8 x 79.7 x 58.4 mm) |
| Cable Gauge | 23 AWG |
|---|---|
| Bandwidth | Tested to 550MHz |
| Conductors | 0.57mm (Nominal O.D) |
| Conductor material | Bare Copper |
Reliable nationwide shipping
Online payment
Knowledgeable | Responsive | Authentic
